How Many Solar Quotes Should You Get Before Choosing?
How many solar quotes should you get? Three comparable quotes is the practical answer. Learn when to add a fourth and how to compare bids fairly.
Read article →You paid for a roof full of panels, the neighborhood goes dark in a storm, and your house goes dark with it. That surprises a lot of homeowners, and it is the most common disappointment after a standard solar installation. If you were counting on solar as insurance against outages, you need to know how the equipment behaves before you sign anything.
So, do solar panels work during a power outage? A standard grid-tied solar system does not power your home during an outage. The panels still make electricity in daylight, but the inverter disconnects them from your house on purpose the moment the grid fails. Backup power is possible, but only with extra equipment designed for it.
Grid-tied inverters shut off during an outage because of a safety feature called anti-islanding. Without it, your panels could push electricity back onto a line that utility crews believe is dead, and that can seriously injure a lineworker repairing the fault.
Anti-islanding is not optional. Inverters sold for grid-connected homes in the United States are tested to the UL 1741 standard, which is built around the interconnection rules in IEEE 1547. Those rules require the inverter to detect that grid voltage or frequency has gone out of range and to stop exporting power within a short, fixed window. Your installer cannot switch this off, and you would not want them to.
The panels themselves are just direct-current generators. All of the decision-making happens in the inverter, so the question of outage behavior is really a question about which inverter you own.
Three setups can keep a home running during an outage: a battery with a hybrid inverter, a solar-plus-storage system with a backup gateway, or a grid-tied inverter with a limited emergency outlet. Each one works by isolating your house from the grid first, so your home becomes its own small, self-contained network.
The component that makes isolation possible is an automatic transfer switch, sometimes built into a gateway unit. When the grid fails, it opens a physical connection to the utility line. Only then is it safe for the inverter and battery to feed your home circuits.
| Setup | Runs at night? | What it powers | Main trade-off |
|---|---|---|---|
| Grid-tied only, no backup | No | Nothing during an outage | Lowest upfront cost |
| Grid-tied inverter with emergency outlet | No | One outlet, only while the sun is up | Cheap, but limited and weather-dependent |
| Battery with hybrid inverter, partial-home backup | Yes, until the battery drains | A chosen set of circuits (a protected-loads panel) | Added battery cost; you choose what to protect |
| Battery with hybrid inverter, whole-home backup | Yes, until the battery drains | Most or all of the house | Highest cost; large loads drain the battery quickly |
Notice what the table says about night: panels alone never supply a home after dark. Only a battery carries you through the evening, which is when most households use the most power.
A battery runs your house for as long as its stored energy lasts, which is its usable capacity in kilowatt-hours divided by how fast you draw power. A small load stretches a battery across days when solar recharges it; a large load can empty the same battery in a few hours.
Here is an illustrative calculation, with assumptions stated so you can swap in your own numbers. Say you have 10 kWh of usable battery capacity and you protect a refrigerator, lights, a router, phone charging and a furnace blower. If those average about 500 watts, that is 0.5 kW, and 10 kWh divided by 0.5 kW gives roughly 20 hours before the battery is empty. Add an electric dryer or a central air conditioner, which each draw several kilowatts while running, and the same battery lasts a small fraction of that time.
Two facts follow from this arithmetic. First, the number that matters is your average draw during the outage, not the size of your solar array. Second, the sun can recharge the battery during the day, so a modest protected-loads setup can run for many days in good weather, while a whole-home setup usually cannot.
A battery also has a maximum output rating in kilowatts. Even with plenty of energy stored, the system cannot start a load that asks for more power than that rating allows. Well pumps and air conditioner compressors are the usual culprits because they briefly draw several times their running wattage when they start.
Plan for backup by deciding which loads you must keep running, adding up their wattage, and then asking installers to size the battery and inverter to that list. Doing it in this order prevents the common mistake of buying a battery first and discovering it cannot carry the loads you cared about.
This is the point where doing it yourself gets tedious. Wattage lists, surge loads and quote comparisons across several companies take real time, and installers vary a lot in how well they explain backup design. Top Solar Services is a directory of verified solar contractors, and you can browse installers by state on the solar companies page to find ones who list battery and backup work.
Battery backup is worth it when your outages are long, frequent or medically important, and it is often hard to justify when you lose power for under an hour a couple of times a year. The value of backup is not about the electricity bill; it is the cost of the specific problems an outage causes you.
Consider what a typical outage costs you. Spoiled food, a sump pump that stops in a storm, a home office that goes offline, or a family member who depends on powered medical equipment are real costs. A frequent, short outage may be covered more cheaply by a portable power station for a few essentials.
Also check how your utility's rules interact with batteries. Net metering policies and time-of-use rates vary by state and utility, and some batteries can earn savings on bills as well as provide backup. Ask each installer to show both uses so you are not paying for backup alone.
That objection is fair. Adding storage raises the total price of a system noticeably, and the battery usually needs replacement sooner than the panels do, so you are paying for a shorter-lived component. If outages are rare where you live, a grid-tied system without a battery can be the sensible choice, and you can leave room to add storage later by asking the installer for a battery-ready inverter. Whatever you decide, get the outage behavior described in the written proposal rather than a verbal assurance.
The next step is to get quotes that state clearly what happens during an outage, so you can compare them on equal terms. Tell installers up front that backup matters to you. Use the Get Matched form to describe your home and your backup needs; it is free for homeowners and sends your project to up to five best-fit contractors, who then contact you directly with quotes you can compare line by line.
How many solar quotes should you get? Three comparable quotes is the practical answer. Learn when to add a fourth and how to compare bids fairly.
Read article →Does shade ruin solar panels? See how partial shade cuts output, when optimizers or microinverters help, and how to judge your roof before you buy.
Read article →Learn how to check a solar installer license, NABCEP certification and insurance before you sign, so an unlicensed contractor never touches your roof.
Read article →